Lead Forensics

Archive for Breakers/Drills

Dewalt D25213K Hammer Drill

Dewalt D25213K Hammer Drill

 

Introduction:

  • 2.8 Joules of impact energy provide fast drilling and powerful chipping
  • 8.0 Amp motor provides high performance and overload protection
  • Reverse feature assists in the removal of fasteners
  • Variable speed allows for precise hole placement on work surface
  • Factory-set clutch reduces sudden, high torque reactions if bit jams
  • 360° side handle adjusts easily for preference or use in tight spaces

Specifications:

Optimal Concrete Drilling5/32″ – 5/8″
Amps8.0Amps
Impact Energy2.8Joules
Vibration ControlNo
Vibration Measurement21.0 m/s2
No Load Speed0-1,150rpm
Blows/Min0-4,300bpm
ChippingYes
ClutchYes
Wood/Steel DrillingWith adaptor”
Tool Length16.6″
Tool Weight6.1lbs

Dewalt D25980K Demo Hammer

Dewalt D25980K Demo Hammer
Introduction
SHOCKS – Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.
52 Joules of impact energy provides maximum performance
15 amp motor provides maximum power and overload protection
Rubber coated handles provide greater comfort and control
Electronic soft start increases productivity by reducing bit walking
Hammer Truck provides easy transportation of pavement breaker
Key Features
Impact Energy 52Joules
Vibration Control Yes – SHOCKS
Vibration Measurement 4.8 m/s2
Amps 15Amps
Max Watts Out 1600W
Loaded Speed (BPM) 900bpm
Variable Impact Control Dial N/ASettings
Chisel Rotation N/A
Tool Length 30.75″
Tool Weight 68.3lbs

General Equipment Company CTS12 RIP-R-STRIPPER

General Equipment Company CTS12 RIP-R-STRIPPER

 

Introduction

The CTS12 RIP-R-STRIPPER® is a highly productive solution for removing ceramic tile, hardwood flooring materials and other covering removal applications for both commercial and DIY projects. A direct, impulse type blow force is provided by a wide range of 35 lbs weight class electric breakers manufactured by Hilti, Bosch, Makita and Hitachi. An impulse blow is required to break through the high bond strengths provided by today’s mastics, glues and thin set materials. The unique design configuration allows the operator to work in a more productive, upright position and significantly addresses jobsite exposure to knee and lower back related concerns. A wide range of industry- standard, 1-1/8 inch hexagon x 6 inch shank accessory tools, including chisels and scraper blades, are available to meet a variety of labor intensive, floor covering removal applications.

Specifications

Operating Environments:
Non-hazardous type locations

Power Source:
35 lbs weight class electric breakers, 115 VAC, 15 ampere

Outside Wheel Width:
21-3/4” (553 mm)

Handle Width:
30” (762 mm)

Transport Length:
28” (711 mm), less breaker

Accessory Tools:
Standard 1-1/8” hexagon x 6” shank

Weight:
130 lbs (59 kg), less breaker

Sullair MCH-3 Chipping Hammer

Sullair MCH-3 Chipping Hammer


Information

  • Weight 17 3/4 lbs.
  • Length 15 1/4″
  • Bore & Stroke 1 1/8″ x 3 3/4″
  • Impact Rate 2280 blows/min.
  • Air Consumption 33 cfm (0.9 m3/min, 16 l/s)
  • Air Inlet Diameter 3/8″ NPT or 7/8-24
  • Shipping Weight 19 lbs.
  • Chuck Size .680 round, .580 hex

Features

  • Four Bolt Backhead
  • D-Handle
  • Minimal Lubrication Required
  • Smoother Operation
  • Choice of Bushings
  • Oval Collar Retainer
  • Rotatable Exhaust Deflector
  • Two Air Inlet Bushings
  • Limited Parts Warranty

Sullair MPB-60A Paving Breaker

Sullair MPB-60A Paving Breaker


Information

  • Weight 69 1/2 lbs.
  • Length 26 1/2″
  • Bore & Stroke 2 5/32″ x 5 5/32″
  • Impact Rate 1360 blows/min.
  • Air Consumption 48 cfm (1.4 m3/min, 23 l/s)
  • Air Inlet Diameter 3/4″ NPT
  • Shipping Weight 74 lbs.
  • Chuck Size 1 1/8″ HX x 6″, 1 1/4″ HX x 6″

Features

  • High-Wear Parts Reduced
  • No Tappet System
  • One Piece, Non-Protrusive Housing
  • Minimal Lubrication Required
  • Direct Impact Piston
  • Parts Interchangeability
  • Quieter
  • Smoother Operation
  • Improved Latch Design
  • Less Air Consumption

Sullair MPB-90A Paving Breaker

Sullair MPB-90A Paving Breaker

 

Information

  • Weight 92 lbs.
  • Length 27 1/2″
  • Bore & Stroke 2 7/16″ x 5 9/32″
  • Impact Rate 1380 blows/min.
  • Air Consumption 62 cfm (1.8 m3/min, 29 l/s)
  • Air Inlet Diameter 3/4″ NPT
  • Shipping Weight 97 lbs.
  • Chuck Size 1 1/8″ HX x 6″, 1 1/4″ HX x 6″

Features

  • High-Wear Parts Reduced
  • No Tappet System
  • One Piece, Non-Protrusive Housing
  • Minimal Lubrication Required
  • Direct Impact Piston
  • Parts Interchangeability
  • Quieter
  • Smoother Operation
  • Improved Latch Design
  • Less Air Consumption

Wacker-Neuson EH 27 Jackhammer

WNC_EH27
Introduction
The re-engineered EH 27 features a leaf spring damping system which protects the user’s entire body from vibration. This feature reduces fatigue and lengthens an operator’s work duration. The air percussion system offers high single stroke energy with minimal machine weight for high breaking productivity.
Key Features
Shank Diameter 1.125 X 6.0 in
L x W x H 28 X 21 X 8.3 in
Weight 59.5 lb
Percussion rate 1,000 rev/min
Single stroke energy 37 ft lb/blow
Engine / Motor Single Stroke, Double Insulated Universal Motor
Voltage 1~ 120 V
Frequency 50 – 60 Hz
Current 15 A
Operating performance 2.4 hp
Percussion system Pneumatic spring percussion system

Wacker-Neuson EH 9 Rotary Hammer

2013 WN EHB11 BLM
Introduction
The innovative magic drilling and chiseling hammers save money because they lose no time due to maintenance and failures: The three-phase AC motor means that there is no changing of worn-out carbon brushes. Failures due to burnt-out windings in the rotor of the motor are likewise a thing of the past. On the other hand, the built-in frequency inverter is a very useful feature, since it means that magic electric hammers can be plugged in to a standard mains socket.

Key Features

 DIMENSIONS
 Length 22.1 in. (560 mm)
 Height 9.6 in. (245 mm)
 Width 4.1 in. (105 mm)
 Weight Without Tool: 22.1 lbs. (10 kg)
 ENGINE
 Engine 3-phase induction motor with inverter in series for alternating current 50/60 Hz with protective insulation
 ELECTRICAL
 Voltage 110 – 127V
 OPERATIONAL
 Strikes per Minute 1,300 – 2,150; adjustable
 Energy per Strike 14 ft. lbs. (19 J)

Wacker-Neuson EHB 11 Rotary Hammer

2013 WN EHB11 BLM
Introduction
The innovative magic drilling and chiseling hammers save money because they lose no time due to maintenance and failures: The three-phase AC motor means that there is no changing of worn-out carbon brushes. Failures due to burnt-out windings in the rotor of the motor are likewise a thing of the past. On the other hand, the built-in frequency inverter is a very useful feature, since it means that magic electric hammers can be plugged in to a standard mains socket.

Key Features

 DIMENSIONS
 Length 24.4 in. (620 mm)
 Height 9.6 in. (245 mm)
 Width 4.1 in. (105 mm)
 Weight Without Tool: 25.8 lbs. (11.7 kg)
 ENGINE
 Engine 3-phase induction motor with inverter in series for alternating current 50/60 Hz with protective insulation
 ELECTRICAL
 Voltage 110 – 127V
 OPERATIONAL
 Strikes per Minute 1,300 – 2,150; adjustable
 Energy per Strike 14 ft. lbs. (19 J)