Exmark 60″ Lazer Z X-Series Zero-Turn Mower

$13,799

Categories: ,

Description

Equipment
Blade SpindlesNo maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 30mm(1.18″)diameter spindle shaft and splined blade driver.
Drive Tires24 x 12.0-12, 4-ply Turf Master®
Cup HolderStandard
Tractor FrameUnibody, welded, heavy-duty 1.5″ x 3″ tubular steel.
Steering ControlHydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires13 x 6.5-6 smooth tread, semi-pneumatic tires.
Parking BrakeLever-actuated disc brake.
SeatDeluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical12-volt battery with 25-amp alternator.
Power Components
Engine BrandKohler®
Engine ModelECV940
Engine Displacement999
Engine SeriesCommand™ EFI
Engine TypeElectronic Fuel Injected
Engine Speed3,650 rpm
Air FilterHeavy-duty canister air filtration system
Fuel TypeGas EFI
Fuel Capacity12-gallon (45.4-L), single fuel tank with single fill location.
Fuel IndicatorYes – electronic Sender
DriveHydro-Drive
Drive DescriptionTwo Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
SpeedInfinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Carb CompliantNo
Deck LiftStandard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety PackageOperator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS2-post foldable ROPS standard with seat belt and latch.
PTO EngagementMagStop Electromagnetic 250-ft-lbs clutch with spot brake
Drive Wheel ReleaseAllows unit movement without engine running.
Casters.50″ thick caster yoke arms.
Decks
Width / Cutting Deck60″
Deck StyleFloating Deck
Deck Style DescriptionFull-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip SpeedApproximately 18,500 fpm.
Cutting Heights1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat.
Blades3 Blades at 20.50″ Length
Dimensions
Width72.8 in. (184.9 cm)
Length83.1 in. (211.1 cm)
Height70 in. (177.8 cm)
Curb Weight1264